All articles

Aluminum Price per kg: Bar, Plate and Extrusion for Quotes

November 19, 2026

Quote parts like this from a drawing — try it on our sample. Try the sample drawingFree for 30 days · Unlimited quotes · No credit card required

Ask three people for the price of aluminum per kg and you get three numbers: the exchange price of the metal, the scrap price, and what a distributor charges for a cut piece of 6082 plate or bar. Only the last one belongs in a quote. It is built in layers: the exchange price of primary aluminum, a regional premium, an extra for alloy and temper, the form (plate, bar, extrusion), the cut and the quantity tier. Machine shops, sheet-metal fabricators and anyone quoting machined aluminum parts buy it every week.

It is mispriced in quotes for two reasons. The number used is a headline price per kg taken from an exchange page, a scrap page or an old invoice; and it is multiplied by the finished weight of the part, when the shop buys, and pays for, the whole blank. This guide shows how the price per kg is built, the weights and formulas an estimator needs and what to add around the stock price. The worked example in EUR prices a bracket machined from plate.

How suppliers price aluminum stock

Distributors and mills usually price in one of three ways:

  • Per kg, in weight tiers. Bar and plate are sold by weight with steps such as up to 50 kg, up to 500 kg and whole bars or plates: the bigger the tier, the lower the price per kg.
  • Per piece or per meter. Short bars, profiles and small pieces are listed per piece or per meter; behind that price sit the weight, a price per kg and the cut.
  • Per cut. Sawing or shearing to size is charged on top, per cut or per piece, unless you buy whole bars or plates.

On top of that come a minimum order value, delivery and, when the customer asks for traceability, a 3.1 certificate (see material certificate 3.1 cost). Ask for all of them: on a small order they can be worth more than the metal.

What is inside the price per kg

LayerWhat it isWhat moves it
Exchange priceThe daily price of primary aluminum, quoted in US dollars per metric tonEnergy, supply and demand, the euro–dollar rate
Regional premiumWhat the market adds for metal delivered in Europe: freight, duties, availabilityTrade measures and supply; it can change within days
Alloy and temperExtra for alloying elements, heat treatment and stress reliefThe alloy: 7075 and other high-strength grades carry the largest extras
FormRolled plate, extruded or drawn bar, profile; section size and toleranceSmall sections and tight tolerances cost more per kg; a custom profile needs a die
Cut and serviceSawing to size, stock-keeping, handling of small ordersPer cut or per kg; minimum order
Quantity tierPrice steps by weight, whole bars or platesLarger tiers cost less per kg

For scale: between 9 and 12 November 2026 the exchange price of primary aluminum moved between about USD 3,140 and 3,225 per metric ton, roughly €2.80–2.90 per kg at the euro rate of each day (indicative range from published exchange-price pages, November 2026). That is the base, not the price of a bar: every other layer in the table is paid on top of it.

6082 is the structural workhorse in Europe and machines well; 6061 is the general-purpose grade, more common on US drawings; 7075 is the high-strength grade for aerospace and tooling; 5083 is a weldable marine plate alloy. For how they machine, see aluminum machinability. T651 plate is stress-relieved, so it moves less when a lot of material is machined away.

Weights and formulas

For 6082 and 6061, at 2,700 kg/m³:

  • plate: kg = thickness (mm) × width (m) × length (m) × 2.70
  • flat bar: kg per meter = 0.0027 × width (mm) × thickness (mm)
  • round bar: kg per meter = 0.00212 × diameter² (mm), so a Ø50 mm bar weighs 5.30 kg per meter
  • buy-to-finished ratio = blank mass ÷ finished mass
  • stock cost per finished kg = price per kg × buy-to-finished ratio

Weight of plate per m², by thickness and alloy:

Thickness6082 and 6061 (2,700 kg/m³)7075 (2,810 kg/m³)5083 (2,660 kg/m³)
10 mm27.0 kg28.1 kg26.6 kg
20 mm54.0 kg56.2 kg53.2 kg
30 mm81.0 kg84.3 kg79.8 kg
50 mm135.0 kg140.5 kg133.0 kg

When you size the blank, add the saw kerf, typically 3–5 mm per cut, and 2–3 mm per face for facing.

The costs around the stock price

LineWhat it covers
Stock price per kgThe price for the tier you actually buy, delivered, in the alloy and temper on the drawing
Cut to sizePer cut or per piece, or your own sawing time and kerf
Minimum order and deliveryCharged per order, so they weigh on small lots
CertificateA 3.1 material certificate when the drawing or the customer asks for it
Your allowanceHandling, storage and price risk between quote and purchase
Offcuts and chipsRemnants you cannot reuse; chips sold back are a credit, so count only what you sell
Rounding up to stock sizeYou pay for the standard size above your envelope, not for the exact blank

Quote the blank, not the finished part. Between the quote and the purchase the price can move, so many shops add an allowance or a surcharge clause; see material surcharges. On sheet, offcuts depend on how the parts nest; see nesting and material yield.

Worked example: a bracket from 6082 plate

A bracket machined from 6082-T651 plate: 0.28 kg finished, from the model, in an envelope of 120 × 80 × 26 mm. The blank is 130 × 90 × 30 mm (allowances on length and width, next standard thickness), cut to size by the supplier: 0.130 × 0.090 × 0.030 × 2,700 = 0.9477 kg per blank, a buy-to-finished ratio of 3.4. The figures are example figures, not market prices: up to 50 kg the price list says €9.20/kg and €6.00 per cut blank; from 100 to 500 kg it says €6.40/kg and €1.50 per cut blank; delivery is €25 per order and the certificate €15; your allowance for handling and price risk is 5% of the supplier's invoice. Two batches, 10 and 200 pieces:

Line10 brackets200 brackets
Blank weight (0.9477 kg each)9.48 kg189.54 kg
Stock9.48 kg × €9.20/kg = €87.22189.54 kg × €6.40/kg = €1,213.06
Cutting10 × €6.00 = €60.00200 × €1.50 = €300.00
Delivery€25.00€25.00
Certificate€15.00€15.00
Supplier's invoice€187.22€1,553.06
Allowance5% of €187.22 = €9.365% of €1,553.06 = €77.65
Total€196.58€1,630.71
Per bracket€19.66€8.15

A line built as finished weight × price per kg (0.28 kg × €9.20 = €2.58) would have covered 13% of the real stock cost of the small batch; on the larger one (0.28 kg × €6.40 = €1.79) it covers 22%. Per kg of blank the real price was €20.74 and €8.60, against €9.20 and €6.40 on the price list. Cutting, delivery and certificate are the difference, and on 10 pieces they are worth more than the metal (€100.00 against €87.22).

FAQ: aluminum price per kg

How much does aluminum cost per kg? It depends on what you buy. Between 9 and 12 November 2026 the exchange price of primary aluminum was about €2.80–2.90 per kg (indicative, from published exchange-price pages); bar, plate and extrusion cost more, because a regional premium, an alloy and temper extra, the form, cutting and the quantity tier are added. For a quote, use the price per kg your supplier invoices for the tier you actually buy, delivered.

Why is the price of aluminum bar or plate higher than the price you find online? The online figure is usually the exchange or scrap price: the metal only. A bar or plate also carries the regional premium, the extras for alloy, temper and form, the distributor's cutting and service and, on a small order, the minimum, delivery and certificate.

How do you calculate the weight of an aluminum plate or bar? For 6082 and 6061 at 2,700 kg/m³, plate in kg is thickness in mm × width in m × length in m × 2.70, and a round bar weighs 0.00212 × diameter² (mm) kg per meter, so a Ø50 mm bar is 5.30 kg per meter. 7075 is about 4% heavier (2,810 kg/m³) and 5083 about 1.5% lighter (2,660 kg/m³).

Should a quote use the finished weight or the weight of the blank? The blank. The shop pays for the whole blank, so stock cost is blank mass × price per kg, plus cutting, delivery and certificate. In the example in this article the bracket weighs 0.28 kg finished and 0.9477 kg as a blank, and the finished weight would have covered only 13% of the stock cost on 10 pieces and 22% on 200.

Aluminum stock in QuoteBuddy

QuoteBuddy reads the technical drawing, including the notes, and builds the estimate as separate lines at your own rates. It prices material on the blank, not on the finished part: it rounds the part's envelope up to the next commercial size in your stock catalog, with allowances, and multiplies the blank's mass by the price per kg in your material price list in Shop setup. The weight on the drawing is only a floor, because a blank can never weigh less than the finished part; when no stock in the catalog fits, the estimate falls back to the finished weight and is flagged for review. Estimates priced on default prices are flagged until you save your own list. The prices that matter are the ones your supplier really invoices for the tier you really buy.

You can watch the QuoteBuddy demo video, from technical drawing to quote. To try it on a drawing of your own, start a free 30-day trial.

We use cookies
We use essential cookies to run QuoteBuddy. With your consent, we also use analytics and marketing cookies. Privacy Policy.

UI build: 9a5f2a06cb797e4f7d25d226434db4cb87c72c48